BLUETTI · 288 Wh
BLUETTI Elite 30 V2: how long it runs
About 2.2 h at 100 W and 3.1 h for an average US fridge, if it can start it: no surge rating is listed.
- 288Wh
- 600W output
- 9.5lb
- $289.99price, Oct 23

What it runs
- Average fridge3.1 h70.4 W · if it can start it
- Modem + router12.2 h11 W
- 4 LED bulbs5.7 h34 W
- CPAP, humidifier on7.9 h22 W
- Laptop4.1 h50 W
- Starlink Standard2.9 h75 W
- TV, 55 inch2.3 h96 W
- Electric blanket2.2 h100 W
- MicrowaveCan’t run it1,100 W
Each device on its own: 288 Wh × 0.85 ÷ (watts + 9 W own draw). Several at once: add the watts, or use the planner.
Every number, with sources
Runtime at steady loads
| Load | Runtime |
|---|---|
| 50 W | 4.1 h |
| 100 W | 2.2 h |
| 200 W | 1.2 h |
| 500 W | 29 min |
288 Wh × 0.85 ÷ (load + 9 W).
Devices, one at a time
| Device | Draw | Runtime |
|---|---|---|
| Modem + router (NRDC) | 11 W | 12.2 h |
| 4 LED bulbs (Philips) | 34 W | 5.7 h |
| CPAP, humidifier on (ResMed) | 22 W | 7.9 h |
| Laptop (Virginia Tech) | 50 W | 4.1 h |
| Starlink Standard (Starlink) | 75 W | 2.9 h |
| TV, 55 inch (ENERGY STAR) | 96 W | 2.3 h |
| Electric blanket (Penn State) | 100 W | 2.2 h |
| Microwave (Penn State) | 1,100 W | Output too low |
Each on its own. Several at once: add the watts, or use the calculator.
Fridges
| Fridge | Average | Runtime |
|---|---|---|
| Efficient 18 cu ft (ENERGY STAR) | 42 W | 4.8 h |
| Average US fridge (EIA) | 70.4 W | 3.1 h |
| Large 26 cu ft (ENERGY STAR) | 80.8 W | 2.7 h |
From the specs
Suits
- Carrying by hand: 9.5 lb.
- Quick solar refills: about 1.9 sun hours at its 200 W limit.
Look elsewhere for
- Running a fridge: only about 3.1 h on an average US fridge.
- Microwaves, kettles and hair dryers: 600 W output is too low for most.
- Fridges and other motors: no surge rating is listed, and its 600 W output may not start one.
- Price per Wh: $1.01, #17 of 18 here.
CPAP users: follow your doctor’s and the device maker’s advice on backup power.
Motors and solar
BLUETTI’s product-page summary mentions 1,500 W surge, but its spec table and manual list no surge rating, only “Lifting Power”, which is for heaters, kettles and other resistive loads. Own draw: about 9 W (manual), included in every runtime here.
Solar: up to 200 W, about 1.9 sun hours to full by our math. BLUETTI lists 2.2 h from its 200 W maximum solar input.
Add-ons from BLUETTI
Solar panels

BLUETTI SP100L Solar Panel
3.8 h sun hours to full
100 W · 10.9 lb
Check price at BLUETTI for the BLUETTI SP100L Solar PanelPaid link
BLUETTI SP200L Solar Panel
1.9 h sun hours to full
200 W · 17.2 lb · may charge a little slower
Check price at BLUETTI for the BLUETTI SP200L Solar PanelPaid link
Sun hours to full with one panel: 288 Wh ÷ (0.75 × the panel’s watts, up to the 200 W one input takes). † The panel’s short-circuit current is above the 10 A limit, so it may charge a little slower. Left out, by the specs: the 350W panel (its 44 V open-circuit voltage is above the 28 V input limit); the SORA 500 (its 49.1 V open-circuit voltage is above the 28 V input limit).
Panel numbers in a table
| Panel | Rated | Weight | Price | Sun hours | Store |
|---|---|---|---|---|---|
BLUETTI SP100L Solar Panel | 100 W | 10.9 lb | $249 | 3.8 h | Check price for the BLUETTI SP100L Solar PanelPaid link |
BLUETTI SP200L Solar Panel | 200 W | 17.2 lb | $399 (ships Oct 29) | 1.9 h † | Check price for the BLUETTI SP200L Solar PanelPaid link |
Sun hours to full with one panel: 288 Wh ÷ (0.75 × the panel’s watts, up to the 200 W one input takes). † The panel’s short-circuit current is above the 10 A limit, so it may charge a little slower. Left out, by the specs: the 350W panel (its 44 V open-circuit voltage is above the 28 V input limit); the SORA 500 (its 49.1 V open-circuit voltage is above the 28 V input limit).
BLUETTI’s panels have MC4 plugs; connect them with BLUETTI’s solar charging cable for this station’s input. All panels side by side: solar panels for power stations.
Nearest in size
Anker SOLIX C1000 Gen 2
1,024 Wh capacity
$0.49 per Wh
Anker price, Oct 23
See it at Anker for the Anker SOLIX C1000 Gen 2Jackery Explorer 600 v2
640 Wh capacity
$0.78 per Wh
Jackery price, Oct 23
EcoFlow RIVER 3 Plus
286 Wh capacity
$1.05 per Wh
EcoFlow price, Oct 23
Check price at EcoFlow for the EcoFlow RIVER 3 PlusPaid link
Maker prices, Oct 23, 2026, unless dated. Checkout price applies.
Compare them in a table
| Station | Maker price | Capacity | $ per Wh | Output | Weight |
|---|---|---|---|---|---|
| BLUETTI Elite 30 V2 (this one) | $289.99 | 288 Wh | $1.01 | 600 W | 9.5 lb |
| EcoFlow RIVER 3 Plus | $299 | 286 Wh | $1.05 | 600 W | 10.4 lb |
| Jackery Explorer 600 v2 (sold out) | $499 | 640 Wh | $0.78 | 500 W | 14.1 lb |
| Anker SOLIX C1000 Gen 2 | $499.99 | 1,024 Wh | $0.49 | 2,000 W | 24.9 lb |
Maker prices, Oct 23, 2026, unless dated. Checkout price applies.
Quick answers
How long will the BLUETTI Elite 30 V2 run a refrigerator?
About 3.1 h for an average US fridge (70.4 W): 288 Wh × 0.85 ÷ (70.4 + 9 W own draw).
How long does the BLUETTI Elite 30 V2 take to charge from solar?
About 1.9 sun hours at 200 W by our math; longer in practice. BLUETTI lists 2.2 h from its 200 W maximum solar input.
Can the BLUETTI Elite 30 V2 run a microwave?
Not most: its 600 W output is below a typical microwave’s 750–1,100 W draw.
Keep comparing
“Paid link” = we earn a commission. Same math either way. See how we make money.
BLUETTI SP100L Solar Panel
BLUETTI SP200L Solar Panel
